MrWaterbeds has Waterbed Sheets in Percale and Cotton ready to ship fast. <sponsor>
Installing waterbed sheets
Step 1
Lay the fitted sheet out and invert the four corners. Shown is an attached sheet with the top sheet tucked under out of the way
Step 2
You can clearly see the corner is inverted. Grab the corner as seen to the left.
Step 3
Slide one hand into the pocket
Step 4
Using the hand that is in the pocket, grab the mattress as far down as you can
Reach across with the other hand and pull the pocket material under the mattress
Step 5
Continue on the other three corners
When all four corners are set, reset each corner again because the sheets usually slide out of position a little
Step 6
Tuck the sheets in at the sides, the head and foot
Untuck the top sheet and finish making the bed
Washing Instructions: Water temperature should be set in accordance with the washing machine manufacturer's instructions for cotton or permanent press fabrics - depending on which you have purchased. Do not bleach colors. Always wash deep colors separately before using. Tumble dry. For best results remove from dryer promptly and upon completion of drying cycle and fold at once. Be sure you try the sheets on for size prior to washing. It is best if sheets are washed in front loading non-agitating washing machines.