Step 1
 |
Layout
Lay one drawer section of the pedestal inside the frame. It
should be recessed slightly from the side and be centered
between the headboard and footboard. |
Step 2
 |
Lay the second drawer section of the pedestal inside the
frame as seen here. |
Step 3
 |
Spacers
Slide the wood spacers between the two drawer sections. Some
trimming may be required depending on manufacturer and size.
It is important that the drawer fronts be recessed a few
inches.
Many times the spacer used at the foot is to be an access
door for extra storage. Be sure it will fit before
continuing. |
Step 4
 |
Positioning
Be certain the assembled drawer pedestal is centrally located
within the frame in its final position. |
Step 5
 |
Remove the Frame
While not disturbing the pedestal, tilt one side of the frame
up and let it rest on its side. This is so you can place the
decking boards on top of the pedestal.
Four poster frames do not require this step. |
